Skip to main content

Foot Traffic Attribution: measure in-person visits from your ads

See how your ads drive real-world visits to your stores, and how to turn on, read and manage Foot Traffic Attribution.

What is Foot Traffic Attribution?

Foot Traffic Attribution (FTA) measures how your advertising drives real-world visits to your business. Clicks and website conversions don’t capture everything. Many customers see an ad and then visit your business in person. FTA connects those in-person visits back to the campaigns that reached them, so you can see the offline impact of your ads.

To do this, Jamloop identifies households that were exposed to your ads, then checks whether those households visited one of your business locations within your attribution window. When a visit follows an ad exposure, it’s counted as an attributed visit. The result is a clear view of which campaigns are bringing customers through your doors, which helps you plan and optimize spend.

How it works

Foot Traffic Attribution follows four steps:

  1. We map your locations. We draw a digital boundary, called a geofence (or polygon), around each of your stores or locations. Where we can, it follows the shape of your building plus a small margin, so we count people who walk in and not people driving past. When you add a new store, we map it and start measuring it automatically.

  2. We detect visits. Each day, we look at anonymous location data from a large panel of opted-in mobile devices. When a device spends time inside one of your geofences, we count it as a store visit and record when it happened. We filter out the noise: very short pass-throughs don’t count, and neither do people who stay for hours, such as employees or neighbors. Only likely shoppers are counted.

  3. We connect visits to households. Each visiting device is matched to its household using privacy-safe identifiers. Because matching happens at the household level, your ad and the visit don’t need to happen on the same device. For example, someone might see your ad on their TV, then visit your store with their phone in their pocket.

  4. We match visits to your ads. Jamloop checks whether that household saw one of your ads before the visit. If it did, and the visit happened within your attribution window, it counts as an attributed visit for your campaign.

Before you start

To turn on Foot Traffic Attribution, your advertiser needs:

  • At least one physical location. Digital locations are not measured.

  • A complete address for each location. Jamloop creates the map coordinates for you.

  • Locations in the United States. Locations in other countries are not measured.

Turn on Foot Traffic Attribution

Foot Traffic Attribution is turned on per advertiser, from that advertiser’s Locations page.

  1. Open the Locations page:

    • Agency accounts: Go to Advertisers, select the advertiser, then open Locations.

    • Advertiser accounts: Go to Organization, then open Locations.

  2. On the Foot Traffic Attribution card, switch on Enable Foot Traffic Attribution.

  3. Attribution turns on for all of the advertiser’s active physical locations, and the status changes to Pending.

To add many locations at once, use Bulk add locations on the Locations page. You can import a CSV file or search Google for your locations.

The status stays Pending until your first attributed visits are available, then changes to Enabled automatically. To see setup details, select View details on the Foot Traffic Attribution card.

After setup, we automatically collect up to 90 days of past visits for each location. You don’t need to wait for new visits before you see results.

Historical data

When a location is first measured, we also look back historically, but only if the advertiser has already run campaigns with us. In that case, we collect visit data from the advertiser’s earliest campaign start date, going back no more than 90 days. Visits in that period count, even if they happened before you turned on Foot Traffic Attribution.

If the advertiser is new and hasn’t run any campaigns yet, we don’t look back, because there are no earlier ads to credit visits to. Measurement starts when you turn on Foot Traffic Attribution.

When to expect data

After you turn on Foot Traffic Attribution, it takes about 7–8 days for visit data to start appearing. After that, new data arrives every day, usually about 7–8 days behind. For example, a visit on the 1st of the month shows up around the 8th or 9th.

To attribute a visit, we look back over your pixel’s attribution window for an ad exposure. The default attribution window is 30 days.

Numbers for the most recent days can change slightly for a day or two as more data arrives. This is normal.

Excluding a location

You can stop measuring a specific location without turning off the feature entirely.

  • Set the location inactive. In Locations, open the location’s actions and select Set inactive. Inactive locations are not measured. Set the location active again to resume measurement.

  • Opt out the primary location. Edit the primary location and select Disable Foot Traffic Attribution for primary location. This option applies to the primary location only. The opt-out stays in place if you turn the feature off and on again.

Turning off Foot Traffic Attribution

  1. Open Locations for your advertiser.

  2. On the Foot Traffic Attribution card, switch off Enable Foot Traffic Attribution.

  3. Select Turn off to confirm.

Measurement stops on the day you turn it off. The Store Visits by Location report is hidden until you turn the feature back on. Data we already collected is kept, and it reappears in the report when you turn the feature back on. Visits from before you turned it off can still arrive over the next 7–8 days.

Understanding your results

Keep these points in mind when you read the Store Visits by Location report.

Attributed visits are not the same as visits caused by your ads. An attributed visit means a household saw your ad and later visited your location. Some of those households would have visited anyway.

Visit counts are a sample. Our data partner sees a sample of mobile devices, not every visitor. Use visit counts to compare trends, locations and campaigns. Do not read them as total foot traffic. A visit is attributed only when we can match the device to a household, so some real visits cannot be matched.

Some locations get a circle instead of a building outline. These locations get a small circle around the address instead of a building outline:

  • Locations inside a large building, such as a mall or office

  • Locations where no building outline is available

A circle can pick up more passers-by and neighboring businesses, so these locations may show more visits.

What is geofencing?

To measure foot traffic, we first need to answer one question: was this device actually at your business location? Geofencing is how we answer it.

Geofencing is a digital boundary drawn on a map around your business location. It traces the shape of your building, like an invisible fence. When a mobile device is detected inside that boundary, we count it as a visit to your location. When a device is outside it, for example in the business next door or driving past on the road, it is not counted.

Polygons are more precise than a simple circle around your address. A circle can pick up traffic from neighboring businesses, nearby roads or homes, which would make your visit counts look higher than they really are. Geofencing follows your building itself, so the visits we count reflect people who were actually at your location.

Geofencing is drawn from the address provided. If an address is wrong or out of date, it lands in the wrong place and visits won’t be measured correctly.

State privacy laws. Some US states have legislation that limits how precisely location data can be matched to devices. Results for locations in those states are less precise than for locations elsewhere, and the list of affected states can change as laws change. In those states, we must measure a larger area around your location, up to about 0.5 km (a third of a mile) in radius. This area can include nearby businesses, homes and traffic. To reduce this effect, a visit in one of these areas counts only if it lasts at least 10 minutes, and we exclude devices that are seen there regularly, such as people who live or work nearby. Expect these locations to show more visits than a building-sized polygon would.

Long stays are excluded. Some devices stay at a location for hours, for example employees or nearby residents. These are not customers, so we exclude:

  • Visits longer than 4 hours

  • All visits on a day when a device is seen at the location across many hours of that day

Past data does not change. We collect each day’s data once. If a location’s polygon changes, the change applies only to days collected after it.

Privacy

Foot Traffic Attribution uses anonymous, aggregated data. Our location data partner does not send us names, contact details or other personal information. Reports show visit counts, not individual people.

Frequently asked questions

Why is my status still Pending?

The status changes to Enabled when your first attributed visits are available. If your locations have no attributed visits in the last 90 days, or since your earliest campaign started, the status stays Pending until new visits arrive. New visits appear about 7–8 days after they happen. If the status stays Pending for longer than two weeks, see Need help? below.

Why don’t I see visits for one of my locations?

Check that the location is physical, active and in the United States, and that it has a complete address. Locations with very low traffic can also show few or no attributed visits.

Why does one location show many more visits than the others?

It may be in a state that requires a larger measurement area, or inside a large building such as a mall or office tower. See Understanding your results above.

Can I see visits from before I turned on the feature?

Yes. We look back to your earliest campaign start date, up to 90 days.

Does the person who saw the ad have to be the one who visits?

No. Attribution works at the household level. If anyone in a household that saw your ad visits your location within the attribution window, the visit counts.

Need help?

Don’t see the Foot Traffic Attribution card, or have a status stuck on Pending? Contact your Jamloop account team or our support team.

Did this answer your question?